Tag Archives: Firewall

Opening Port 80 in Windows Firewall to Support Calling SSRS From Another Computer

Recently I was working on another article for RedGate’s SimpleTalk site. As part of it, I had SSRS installed on a Windows 10 computer, and needed to connect to it from another computer. I was having a lot of issues connecting, until I remembered SSRS connects using Port 80, and by default Windows 10 (and previous versions) block Port 80 for incoming traffic.

The solution was to, obviously, open Port 80 on the Windows 10 computer. Doing so was not difficult, but did require quite a few steps, and of course administrator rights on the computer.

First, open the Windows 10 Settings. Then, click on Network & Internet.

image

On the Status window, click on Windows Firewall.

image

From here, click on Advanced settings.

image

If prompted confirm you do wish to make changes. When the Windows Defender Firewall dialog appears, click on Inbound Rules.

SNAGHTMLef395d1

Now click on New Rule

image

In the New Inbound Rule Wizard window, change the type of rule to be Port. Then click next.

image

On the next window, leave the rule applying to the default of TCP. For the port, assuming you are using the default setup, enter 80 for the port number. If you setup SSRS on a different port then obviously use that port number instead.

image

On the action page we tell Windows what we want to do if it finds incoming traffic on this port. For this development environment we will take the default of Allow the connection. If you had setup https service on your report server, then you could take the second option of allow if secure.

image

Next, we need to specify what network type the rule should apply to. For the scenario, I am on a small network, such as you might have at home, and that network was setup as private. Thus I am leaving Private checked on, and unchecking Domain and Public.

Unchecking public is especially important if you plan to take your laptop out to a coffee shop, you don’t want someone trying to hack into your machine via port 80. When done just click next.

image

On the last screen we’ll give the firewall rule a name, and a description. When done, click finish.

image

As you can see, the new rule now appears in our Inbound Rules area.

SNAGHTMLf01e748

Once you have completed working with your SSRS server, I’d suggest you return here, right click on the rule, and either disable it, or if you know it will no longer be needed, delete it.

And with that you should now be able to connect to the computer running SSRS from another computer on your network.

Advertisements